Telco’s interior heaters type TU are well tested flow-through heaters. It has a splashproof design and are suitable for use in all types of rooms, both wet and dry.

This heater has higher power per length unit than most other heaters on the market, and is therefore well suited to bathrooms and other rooms with high heating requirements and limited space.

Type TU is a particularly solid heater designed for external control. Two installation nipples permit further connection.

Data sheet and assembly instructions

TypeEl numberPowerHeightLengthDepthDescription
TU 0354 490 35300 W150 mm353 mm83 mmNormaltemperert ovn for fast
installasjon og ekstern styring.
TU 0854 490 36800 W150 mm632 mm83 mm
TU 1254 490 371200 W150 mm843 mm83 mm
TU 1654 490 381600 W150 mm1107 mm83 mm
Floor brackets54 490 45

The heaters are manufactured from extruded aluminium sections. The complete heating element is also made from aluminium and incorporates a heating coil, insulation, cooling fins and connection lead in one unit. This is a tried and tested design that provides excellent heat distribution and a long lifetime.

TRLU can be painted in special colours (link to page) and supplied with curtain clamps and floor brackets.

Flow-through heater with thermal cut-out
230 V
Colour: Pearl white
Splashproof and rustproof; can be used in wet rooms.
Connection: Right-hand side
Fitting to walls: Heaters must be fitted horizontally and are delivered with solid wall brackets.
Floor installation: Heaters can be fitted to the floor using floor brackets that need to be ordered separately
Max. surface temperature: 44°C
Minste monteringsavstand til sidevegg:2 cm
Minste monteringsavstand til gulv:5 cm
Minste monteringsavstand til tak eller vindusbrett:30 cm